濟南立強模具有限公司是一家提供濟南注塑模具、注塑加工等產品的山東模具制造廠家!

山東濟南注塑模具制造加工

     

新聞動態

您現在的位置: 網站首頁>>新聞動態>>如何降低注塑加工時的能耗問題呢?

如何降低注塑加工時的能耗問題呢?

來源:http://www.giulya.com 日期:2020-08-10 發布人:liqiang 瀏覽次數:
濟南注塑加工的過程,是非常耗費原料的,那么是否有什么方法可以降低注塑加工時的能耗問題呢?今天濟南注塑加工小編就來簡單的為大家介紹一下。
Jinan injection molding process, is very expensive raw materials, so is there any way to reduce the energy consumption of injection molding processing? Today, Ji'nan injection molding processing small knitting to a simple introduction for you.
對一家注塑制品廠而言,注塑成型過程所占據的能耗大約占到60%,因而有效降低注塑機的能耗是注塑工廠節能的重要途徑。隨著注塑機本身節能技術的不斷提升,降低注塑工廠整體能耗需要從生產管理、加工工藝與物料、生產車間配套等方面全面考慮。
For an injection molding factory, the energy consumption of injection molding process accounts for about 60%, so effectively reducing the energy consumption of injection molding machine is an important way to save energy in injection molding factory. With the continuous improvement of energy-saving technology of injection molding machine itself, reducing the overall energy consumption of injection molding plant needs to be comprehensively considered from the aspects of production management, processing technology and materials, production workshop matching, etc.
濟南注塑加工
Injection molding in Jinan
生產車間的布局主要從兩個方面考慮:在滿足生產需求的情況下,在根據生產工藝優化布局的同時,滿足特定生產條件下靈活應用的要求。
The layout of production workshop is mainly considered from two aspects: under the condition of meeting the production demand, optimizing the layout according to the production process, and meeting the requirements of flexible application under specific production conditions.
1、供電時,為了滿足穩定生產用電的需要,同時要有適當的裕度,不能因功能消耗過多而造成用電過多。
1. In power supply, in order to meet the needs of stable production power consumption, at the same time, there should be appropriate margin to avoid excessive power consumption due to excessive functional consumption.
2、建設冷卻水循環設施,為冷卻水系統配備有效的保溫隔熱系統。
2. Construction of efficient cooling water circulation facilities, cooling water system equipped with effective insulation system.
3.優化車間的整體生產布局。許多生產過程是按順序協調的。合理的工位協調可以減少周轉所需的時間和能耗,提高生產效率。
3. Optimize the overall production layout of the workshop. Many production processes are coordinated in sequence. Reasonable station coordination can reduce the time and energy consumption needed for turnover and improve production efficiency.
4.照明和其他工廠設備應盡可能由有效的小型設備單獨控制。
4. Lighting and other plant equipment shall be controlled separately by effective small equipment as far as possible.
5.對車間設備進行定期維護,避免損壞公共設施,影響生產正常運行,進一步增加能耗。
5. Carry out regular maintenance of workshop equipment to avoid damaging public facilities, affecting normal production operation, and further increase energy consumption.
6.濟南注塑加工建議有條件使用無塵車間,車間做好5S工作,防止粉塵損壞機械精密部件。
6. It is suggested to use dust-free workshop for injection molding in Jinan. The workshop should do 5S work well to prevent dust from damaging mechanical precision parts.

相關新聞

地址: 濟南市天橋區太平莊藥山鎮丁莊工業園8號; 網址:http://www.giulya.com  傳真:0531-61388458   手機:18610627886

濟南立強模具有限公司   魯ICP備15002024號-2   技術支持:網站建設·推廣運營 流量統計:

欧洲国语自产_免费看黄直播_国产成人不卡高清_久久国产美女精品久久_国产福利第一视频在线播放